Figure 1.2.3 - 12; Multi-Receiver Rtca/Do-260 Tests - Viavi ATC-5000NG Operation Manual

3.4.7

MULTI-RECEIVER RTCA/DO-260 TESTS

The RTCA/DO-260 Tests Menu allows the user to define tests that set the Test Set Transmitters for RTCA
DO-260 Receiver testing.
3.4.7.1 RTCA/DO-260 Tests Menu (Normal)
Figure 1.2.3 - 12 RTCA/DO-260 Tests Menu (Normal)
Screen Components
Special Test
Power Mode
Trigger Source
Trigger Mode
1-2-3
Page 24
Description
Allows the user to select the Special Test.
Allows the user to select the Power Mode.
Allows the user to select the Trigger Source.
Allows the user to select the Trigger Mode.
If delay is selected, the delay defined in the Generator setting is
used for + or – delay.
If random is selected, Random Start and Random Width are
added to the screen to select the minimal starting time and
width of the random starting time.
If Walk is selected, a signal is set at a positive or negative delay
and moves the signal by 25 ns delay each transmission.
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Operation, Menus and Screens
Multi-Receiver Menu
Rev. L0
February 2020