The Utility Tray can also be opened using the Tray soft-key located at the top of the UI.
See section 3.2, "Utility Functions", on page 3-19
1.4.8 Power Button
The Power Button is used to turn the device on and off. The device is turned on or off by
pressing and holding the button for approximately 3 seconds.
NOTE
The CX100 can be configured to emit a beep at power up/power down.
4.2.5.2, "Beep at Power Up/Down", on page
1.5
CX100 Connectors
CAUTION
Do not overload input connectors. Refer to product specifications or the product data
sheet for maximum input ratings.
Mise en Garde
Ne surchargez pas les connecteurs d'entrée. Reportez-vous aux spécifications du
produit ou à la fiche technique du produit pour connaître les valeurs d'entrée maximales.
22144015
August 2023
Audio Input
ANT/SWR
Figure 1-3 CX100 RF Input/Output Connectors
CX100 ComXpert Operation Manual
for additional information.
4-7) for information.
Aux I/O
Audio Output
10 MHz I/O
Duplex
Chapter 1 Overview of the CX100
CX100 Connectors
See section
Rev 002
1 - 7