Chapter 4 Configuring System Settings
Updating the Device's Software
4.7
Updating the Device's Software
4.7.1 Software Availability
Refer to the CX100 product support Web page or contact VIAVI to verify your CX100
contains the most recent software version available.
Software can be downloaded from the product's web page directly to the test set via a
network update or the software can be copied to a USB device and updated using the USB
update procedure.
Add link to CX100 web page when available.
4.7.2 Methods of Updating Software
CX100 firmware can be upgraded in the field using one of the following methods:
•
Wired network or intranet connection
•
WiFi connection
•
USB device
•
CD-ROM (see note below)
NOTE
Due to security concerns, some customers are not permitted to download software
from a public web site. In such cases, software updates are available via CD
distribution. Contact Customer Support for information about the availability of software
updates in CD format.
4.7.2.1
USB Update Procedure
NOTE
Disconnect Ethernet cable connections before proceeding with this procedure.
To Update the Device - Software Source - USB Device
1.
Navigate to the VIAVI product support Web page and download software to a USB
device.
2.
Connect the CX100 to an AC power supply ensure an uninterrupted supply of power
during the update.
information.
Rev 002
4 - 18
See section 2.2.1, "AC Power Operation", on page 2-6
CX100 ComXpert Operation Manual
for
22144015
August 2023