Table of Contents
Advertisement
4.2.5 Configure Device Power Settings
4.2.5.1
Battery Saving Mode
To Set the Power Off Delay
1.
Navigate to the
Power Management button).
2.
Select the
3.
Select the amount of idle time to wait before the device automatically powers itself
off. The new setting is applied when selected.
4.2.5.2
Beep at Power Up/Down
To Power Up/Down Beep
1.
Open the Sound Settings panel.
2.
Select the Play Chime on Power Up/Down tick box.
3.
Select the Power Up/Down Chime Volume field to adjust volume of the chime to the
desired volume.
4.
Press the
NOTE
Change takes effect immediately; the device does not need to be rebooted to apply the
change.
4.2.6 User Information
The User Information menu allows users to enter operator information such as the
technician's name and ID.
To Specify User Information
1.
Navigate to the User Information (System Settings > User Information).
2.
Enter the desired user information.
3.
Press the Back button to exit the menu.
22144015
August 2023
Screen & Power Management
Power Off Delay
button.
OK button
to confirm.
CX100 ComXpert Operation Manual
Chapter 4 Configuring System Settings
Configuring Device Settings
panel (System Settings > Screen &
Rev 002
4 - 7
Advertisement
Table of Contents
Troubleshooting
