Autotest Soft-Key Panel; Table 5-36 - Viavi CX100 ComXpert Operation Manual

Chapter 5 RF Instrument Function Descriptions
Autotest Function
Progress Bar
The progress bar provides a visual indicator of test progress.
Soft-key Panel
The soft-key panel contains controls that are used to perform different functions
within AutoTest. See section 5.4.5.2, on page 5-69 for a description of the soft-keys
that are supported in Autotest.

5.5.2 Autotest Soft-key Panel

The Autotest soft-key panel contains the following soft-keys:
Soft-key
Run Selected
Soft-key
Select All/
Unselect All
Pause Test
Soft-key
Resume Soft-key
Abort Soft-key
Test Results
Soft-key
Save Results
Soft-key
Report Formats
Open Reports
Rev 002
5 - 72
Table 5-36 Autotest Soft-keys
Description
When the Run Selected Tests soft-key is pressed, the
selected tests are performed.
When the Select All soft-key is pressed, all tests in the table
will be selected. When the Unselect All soft-key is pressed, all
tests in the table will be unselected.
When the Pause Test soft-key is pressed, the test sequence
stops at the end of the test that is currently in progress.
Pressing the Resume soft-key starts the test sequence from
the point at which the test was paused.
Pressing the Abort soft-key displays a user prompt which
requires the user to confirm the request to stop the test. When
the test is aborted, all data is lost and not retrievable.
When the Test Results soft-key is pressed, the screen
updates to display a scrollable screen with test data. Test
results cannot be viewed while a test is in progress; tests must
be paused or completed before the soft-key is enabled.
When the Save Results soft-key is pressed, test results are
automatically saved in XML format. Test results are also saved
in formats that are selected using the Report Formats soft-key
Pressing the Report Formats soft-key displays a list of file
formats that the user can select and save the test results as.
The supported report formats are: PDF, HTML, JSON, and TXT.
Pressing the Open Reports soft-key displays a list of test
results from previously run tests. The user can select a file to
view. When a file is opened for viewing, other functions are
available such as saving the file in a different file format or
deleting the test result.
CX100 ComXpert Operation Manual 22144015
August 2023