Viavi CX100 ComXpert Operation Manual page 11

Safety Definitions
This operation manual uses the following terms to indicate conditions or activities which
are potential safety hazards:
Term
CAUTION
Mise en Garde
WARNING
Avertissement
Equipment Usage
This product is designed and tested to comply with the requirements of IEC/EN61010-1
'Safety requirements for electrical equipment for measurement, control and laboratory use'
for Class I portable equipment and is for use in a pollution degree 2 environment.
The equipment is designed to operate from MIL-PRF-2800 Class 2.
When moving the equipment from a cold to hot environment, allow the temperature of the
equipment to stabilize before it is connected to the supply to avoid condensation forming.
The equipment must only be operated within the environmental conditions specified in the
performance data.
This product is not approved for use in hazardous atmospheres or medical applications. If
the equipment is to be used in a safety-related application, such as avionics or military
applications, the suitability of the product must be assessed and approved for use by a
competent person.
WARNING
Operating this device in a manner not specified in accompanying documentation may
impair the safety protection built into the device.
Avertissement
Utiliser cet appareil de manière non spécifiée dans la documentation
d'accompagnement peut nuire au dispositif de protection de sécurité intégré dans
l'appareil.
Rev 002
viii
Table 2 Safety Definitions
Definition
Identifies conditions or activities that, if ignored, can result in
equipment or property damage, e.g., Fire
Identifiez les conditions ou les activités qui, si ignorées, peuvent
entraîner des dommages à l'équipement ou aux biens, p. ex. un
incendie
Identifies conditions or activities that, if ignored, can result in
personal injury or death
Identifiez les conditions ou les activités qui, si ignorées, peuvent
entraîner des blessures personnelles voire mortelles
CX100 ComXpert Operation Manual 22144015
August 2023