Troubleshooting Symptom Index - Viavi CX100 ComXpert Operation Manual

8.6 Troubleshooting
This sections lists Operator Level corrective actions for malfunctions which may occur
during normal device operation. This section cannot list all malfunctions that may occur,
nor all tests or inspections and corrective actions. Perform tests/inspections and corrective
actions in order listed. If a malfunction is not listed, or is not corrected by the listed
corrective actions, contact customer support.

8.6.1 Troubleshooting Symptom Index

Device does not power on when operating on battery power.
Device does not power on when connected to an AC power
supply.
No receiving a signal at ANT/SWR or DUPLEX connector.
No generator output at ANT/SWR or DUPLEX Connector.
No input signal received at Audio In connector.
No signal output at Audio Out connector.
No input signal received or trace frozen on the Spectrum
Analyzer.
22144015
August 2023
Description
CX100 ComXpert Operation Manual
Chapter 8 Care, Maintenance, and Troubleshooting
Troubleshooting
Page
8-8
8-8
8-9
8-11
8-11
8-12
8-12
Rev 002
8 - 7