Network Software Update Panel - Viavi CX100 ComXpert Operation Manual

3.1.6 Network Software Update panel

The Network Software Update panel contains the controls and parameters used to
update CX100 software when files have been placed in a network location.
4.7, "Updating the Device's Software", on page 4-18
updating the device's software.
Control/Setting
Update URL
Username and
Password
Force Software Update
Update Soft-key
22144015
August 2023
Table 3-4 Network Software Update Controls and Settings
Description
The Update URL field defines the URL address from
where the device will download the software. This URL
should be accessible to the device without security
restrictions.
A user name and password can be created to secure
the device against undesired updates.
When performing a software update, the device
determines if a software load is more current than the
software currently installed on the device. If the software
load is older, or the same version as the software
installed on the device, the system determines that
there is not a software update available. Selecting the
tick box "Force Software Update" causes the device to
update software regardless of version time/date
information.
Pressing the Update soft-key starts the software
update procedure. An error message is generated if a
configuration error (i.e., does not detect software file)
prevents the device from updating software.
CX100 ComXpert Operation Manual
Chapter 3 System and Utility Function Descriptions
for step by step instructions for
Introduction
See section
Rev 002
3 - 7