Setting The Odn Class; Performing A Truepon Measurement - Viavi SmartPocket OLP-39G User Manual

OLP-39G/-39X TruePON Tester

Setting the ODN class

The ODN class can be set to Auto or an specific class individually
for G-PON and XGS-PON.
To set the ODN class:
1. In the Home screen press the Config key.
The Config menu opens.
2. Press [] or [] to select G-PON or XGS-PON.
3. Press [] to step trough the ODN classes:
– G-PON: Auto > B > B+ > C > C+ > C++ > Auto >...
– XGS-PON: Auto > N1 > N2 > E1 > E2 > Auto >...
4. Press [MODE] to close the menu.

Performing a TruePON measurement

To get TruePON measurement results a TruePON measurement
must be started.
To perform a measurement:
Set ODN class (see
I
Select Pass/Fail display mode (see
I
play mode" on page
"Setting the ODN class" on page
"Selecting a Pass/Fail dis-
23).
6 T PON
RUE MODE
S ODN
ETTING THE CLASS
25).
25