Using The System Menu (M6); Finding The System Menu; System Menu Functions - Danfoss VACON NXP IP00 Operating Manual

VACON® NXP IP00 Drive Modules
Operating Guide
3.
In the Fault history menu, push the [enter] button for 3 s.

The symbol H# changes to 0.

8.7 Using the System Menu (M6)

8.7.1 Finding the System Menu

The System menu includes the general settings of the AC drive. These are, for example, application selection, parameter sets and
information about the hardware and software. The number of submenus and subpages shows as the symbol S# (or P#) on the value
line.
Procedure
1.
To find the System menu, scroll down in the main menu until the location indication M6 shows on the first line of the dis-
play.
2. To go to the System menu from the main menu, push the Menu button Right.

System Menu

8.7.2 System Menu Functions

Table 23: System Menu Functions
Code Function
S6.1 Language selection
S6.2 Application selection
S6.3 Copy parameters
S6.3.1 Parameter sets
S6.3.2 Load up to keypad
S6.3.3 Load down from keypad
94 | Danfoss A/S © 2023.09
READY
I/O term
S1 S11
Min Max
– –
– –
– –
– –
– –
– –
Unit Default
– English
– Basic applica-
tion
– –
– –
– –
– –
Using the Control Panel
Cust Description
The selection is different in
all the language packages
Basic application
Standard application
Local/Remote control appl.
Multi-Step application
PID Control application
Multi-Purpose Control
appl.
Pump and Fan Control
appl.
–
Store set 1
Load set 1
Store set 2
Load set 2
Load factory defaults
All parameters
All parameters
All but motor parameters
AQ351737303996en-000201 / DPD00888