Error Message On Control Panel Display - Danfoss VACON NXP IP00 Operating Manual

VACON® NXP IP00 Drive Modules
Operating Guide
Procedure
1.
Open the VACON NCDrive.
®
2.
Go to File and select Service Info....

The service information file opens.
3. Save the service info file on the computer.

11.4 Error Message on Control Panel Display

The alphanumerical keypad memory has been upgraded from 32 kbit to 64 kbit in VACON
tions with larger parameter sets to be copied to keypad memory. For more information on control panel display, see
If an application with larger parameter sets is uploaded into 32 kbit control panel, it shows an error message "Failed". A new control
panel version with 64 kbit must be used to avoid the error message.
118 | Danfoss A/S © 2023.09
Fault Tracing
NX AC drives. This allows the applica-
®
3.6.2 Display
AQ351737303996en-000201 / DPD00888