Table of Contents
Advertisement
2 . 1 0 Installing USB Memory
•
When handling USB memory, please pay attention to static electricity .
•
Do not remove the USB memory while it is being accessed (Device access indicator turns red and POWER
LED blinks) . The captured data may get damaged .
•
When using HDD and USB memory (4GB or more), please format them using FAT32 .
How to install USB memory
Install the USB memory in the USB memory slot.
USB memory
When the USB memory is installed in this device, please handle with care .
<USB memory specifications>
• Power supply: +5V
• Consumption current: 250 mA or less
• Capacity: No limit (however, up to 4GByte for 1 file)
* USB memory with security function such as fingerprint authentication or USB memory without shell (metal
part) on the connector part cannot be used.
* USB bus power type HDD cannot be used. Format the HDD to FAT32.
For the latest information and support information, please check the following URL.
http://www.graphtec.co.jp
CHAPTER 2 Checks and Preparation
2-17
Advertisement
Table of Contents
