GRAPHTEC midi LOGGER HV User Manual page 90

CHAPTER 3 Settings and Measurement
L-R key mode and Cross key mode
XY digital display has 2 operation modes.
2 operation modes are L-R key mode with the same key operation as the Y-T waveform screen and Cross
key mode optimized for operation of XY waveform screen.
• L-R key mode
Move XY-CH and axis with the [CH SELECT] key (hereafter CS key) or the
Change the contents of XY-CH and axis selected with the
While in "MONITOR" display, you can move the XY-CH with the CS key or the
running or capturing. (This does not apply during replaying even in "MONITOR" display.)
In addition to the above setting, use CS key or the
direction key to move between XY-CH channels.
* The contents sandwiched between
Change the setting contents of XY-CH/axis selected with the
3-46
Use the CS key or the
key to move down .
Use the CS key or the
key to move up .
Move XY-CH
and
Use the CS key or
the key to move
down .
Use the CS key or the
key to move up .
Move axis
and keys
keys.
keys move the axis. Then, press the same
marks the active XY-CH.
Use the CS key or
the key to move
down .
Use the CS key or
the key to move up .
Move XY-CH
keys.
keys.
keys during Free