GRAPHTEC midi LOGGER HV User Manual page 50

CHAPTER 3 Settings and Measurement
3 . Status mark
: Appears when neither capture nor replay is in progress.
: Displayed when the captured data is being recorded.
: Appears when waiting for a trigger during capturing and for the stop key after capturing.
: Displayed when replaying the captured data.
: Displayed when replaying during capturing the data (Refer to in "3.2 Key Operation" - "(10)
Please do not turn Off the power and do not remove the SD card or USB memory when the status mark
indicates other than "STOP" . The data will be damaged, and it will not be accessable .
Please start the operation after making sure that the status mark is switched to "STOP" .
4 . Device access display (Internal memory)
: Internal memory is recognized but is not being accessed.
: Internal memory is being accessed. While the internal memory is being accessed, the
Please do not turn Off this device's power when accessing the internal memory.
Data will be damaged, and it will not be accessable .
5 . Device access display (SD card)
: SD card is not attached.
: SD card is attached but not accessable.
: SD card is being accessed. Do not remove the SD card. The POWER LED light also
Please do not remove the SD card and do not turn off power when accessing the SD card .
Data will be damaged, and it will not be accessable .
3-6
REVIEW".).
POWER LED also flashes.
flashes during accessing the SD card.