GRAPHTEC midi LOGGER HV User Manual page 59

24 . Y-axis level bar
Displays the signal position of CH set on the Y-axis.
In the Y-axis level bar, the trigger range and the alarm range are not visable.
25 . XY waveform display
Displays XY waveform graph.
Set any analog CH to X-axis (horizontal axis) and Y-axis (vertical axis) respectively.
26 . DIV display
Displays the measurement amount (unit) for one grid in XY waveform graph.
27 . X-axis level bar
Displays the signal position of CH set on the X-axis.
In the X-axis level bar, trigger ranges and alarm ranges are not visable.
28 . Vernier reference line
Displays the Vernier reference line when POSITION setting and the Vernier setting are visable on the XY
digital screen or when "Origin" is selected by the Quick setting (a green straight line).
When the Vernier is set to 100%, Vernier reference line is visable at 5DIV position.
When the Vernier setting is changed, Vernier reference line moves according to the percentage (%) of
Vernier.
For example, when the Vernier is set to 80%, the Vernier reference line moves to 4DIV position.
For details of Vernier function, refer to "3.3 Operation Modes" - "(3) XY waveform display" - "Vernier".
CHAPTER 3 Settings and Measurement
3-15