GRAPHTEC midi LOGGER HV User Manual page 131

Display contents
Select the content displayed on each display frame on the logging screen.
Choose from analog CH (CH1 to CH4/Pulse CH (P1 to P4)/Logic.
Same as this selected part .
The zone allocation when divided is as shown in the figure below.
(1)
(2)
2-division
Statistical calculation clear
Clear (initialize) real time statistical calculation.
The maximum value, the minimum value and the P-P value are initialized to 0 respectively.
The average value is set to the initial value of 0, and after recording the data for more than 1 point, the
average value will be displayed.
(1) (3)
(2) (4)
4-division
CHAPTER 3 Settings and Measurement
(1) (5)
(2) (6)
(3) (7)
(4) (8)
8-division
3-87