GRAPHTEC midi LOGGER HV User Manual page 153

(5)-4 FTP/WEB server settings
Set the FTP server/WEB server as this device.
Setting
FTP server port number
WEB server port number
(5)-5 Mail settings
Enter the settings for emails on the device.
When mail send setting is complete various notification setting (Alarm, low battery, drive low capacity (only
during capturing)) is sent. Also, when periodic notification is set, it is sent according to the set time.
(1) Mail send settings
Setting
Outgoing mail Destination
settings Settings
Notification
settings
(1)
(2)
Set port number of the FTP server installed in this device.
0 to 65535
Set port number of the WEB server installed in this device.
0 to 65535
(1)
(2)
TO
CC1 to CC3
Subject
Alarm
Low battery
Drive free space
Periodic
notifications
Description
Set the destination (address) of the E-mail.
Enter the string of up to 63 characters.
Set the destination of the E-mail (broadcast 1 to 3).
Enter the string of up to 63 characters.
Set the subject of the E-mail.
Enter the string of up to 63 characters.
Set the E-mail send when an alarm occurs.
Off, On
Set the E-mail send when the internal battery lowers.
Off, On
Set the E-mail send when the drive free capacity during recording is
low.
Off, On
Set the periodic notification E-mail send.
Off, 1 hour, 2 hours, 3 hours, 6 hours, 12 hours, Specified time
* You can set the specified time to the hours : minutes : seconds.
CHAPTER 3 Settings and Measurement
Description
3-109