How To Connect Via Usb - GRAPHTEC GL240 Setup Manual

For GL980/GL2000, by specifying USB connection settings on [Printer function] on [OTHR],
a printer icon is additionally displayed on the upper right of the screen, and the printer is added
also on the menu.
Icon displayed when [Printer] is [On].
Icon displayed when [Printer] is [Off ].
If test printing by [Print test] on [Printer function] is successfully performed, the connection is
completed. Press [OK] to fi nish the connection setting. When the printer is displayed on the
menu screen as shown below, confi gure the printer.
The printing functions are as follows:
For instructions on how to specify print settings, see the manual of the printer functions in the
accompanied CD.
1. Direct Y-T printing
2. Hard copy printing
3. Memory out printing
4. List printing
5. Logging printing
How to Connect via USB
Select [USB] for [Usage interface] on [Printer function].
The printer is additionally displayed on the upper right of the
menu screen.
If a printer available for printing is connected, the printer icon
becomes active. This indicates that printing is available.
If the printer icon remains inactive, printing is not available.
Check the connection again.
E-12