GRAPHTEC midi LOGGER HV User Manual page 89

• During replays
RANGE/SPAN mode
display
Y-axis CH number
RANGE/SPAN mode
display
XY-CH number
RANGE/SPAN mode display
X(Y)-axis CH number
X(Y)-axis CH annotation
X(Y)-axis cursor A (B) indication
Value differences between cursor A and B on X(Y)-axis
Value indicating by selected cursor : The indication value on the graph designated by the current selected
XY-CH number
X-axis CH number
Active XY-CH
XY-CH number
Inactive XY-CH
: XY-CH number
: Displays which CH is operating in the RANGE mode or the SPAN mode.
: Analog CH number set to the X(Y)-axis.
: Annotation of the analog CH set to the X(Y)-axis is displayed. When the
number of annotation characters is larger than the display area, all the
character strings are displayed by scrolling to the left.
value : The indication value on the graph designated by each cursor is displayed.
: Displays the difference of measured values between cursors A and B.
When cursor A is selected, B-A value is displayed. When cursor B is
selected, A-B value is displayed.
cursor is displayed.
X-axis CH annotation
Y-axis CH annotation
CHAPTER 3 Settings and Measurement
Value indicated by
selected cursor on X-axis
Value indicated by
selected cursor on Y-axis
3-45