GRAPHTEC midi LOGGER HV User Manual page 154

CHAPTER 3 Settings and Measurement
(2) Mail send server settings
Outgoing mail
settings
3-110
Setting
Send (SMTP) Server Name
SMTP port number
Time zone
SMTP authentication method
SMTP-AUTH
POP3 server settings
SMTP user name
SMTP password
SMTP encryption
E-mail Address
Test email
Description
Set the E-mail Send Server Name (server address).
Enter the string of up to 63 characters.
* Enter the domain name or IP address.
* Enter the server name notified from the mail provider.
Set the port number of the E-mail Send Server.
0 to 65535
* Enter the port number notified from the mail provider.
Set the time zone.
UTC-12:00 to UTC+13:00
* This is a common setting with time zone setting of POP3 server
setting and NTP setting.
Set authentication method for SMTP-AUTH.
PLAIN, LOGIN, CRAM-MD5, DIGEST-MD5
Set the SMTP authentication method.
Off, POP before SMTP, SMTP-AUTH
You can set this when POP before SMTP is selected in SMTP
authentication method.
Set the user name to log in to the SMTP server.
Enter the string of up to 63 characters.
Set the user name to log in to the SMTP server.
Enter the string of up to 63 characters.
Set the password to log in to the SMTP server.
Enter the string of up to 63 characters.
Set the encryption of the SMTP server.
Off, StartTLS, Over SSL
* Set the encryption notified from the mail provider.
Set your own E-mail address.
Enter the string up to 63 characters.
A test E-mail is sent.