GRAPHTEC midi LOGGER HV User Manual page 67

11) DISPLAY
<When Free Running and data capturing>
The key is used to switch the screen mode.
When running Free Running (when the capturing is stopped) mode, the screen
mode can be switched between data capturing and data replaying.
Pressing this key switches the screen display as follows:
<Waveform + Digital display>
Displays the Y-T waveform and the Digital display.
Settings can be changed using the [SPAN/TRACE/POSITION]
key.
<All waveform screen>
Displays only the waveform in full screen mode.
<Logging display + Real time statistical calculation screen>
Logging display and Real time statistical calculation screen in
letters.
Use the
mode. The calculation results are displayed only when switched
to "Real time statistical calculation screen".
Refer to "3.2 Key Operation" - "(8) FAST FORWARD key (KEY
LOCK)" for details on "Real time statistical calculation screen".
<XY screen>
Displays XY waveform and XY digital display.
In addition, You can change the settings" using SPAN/TRACE/
POSITION" key.
CHAPTER 3 Settings and Measurement
FAST FORWARD keys to change the display
3-23