Table of Contents
Advertisement
Config Key
The Config key is used to define device and communication settings.
Figure 3-6.1.
Main Menu, Config key.
Display
Select the format for the display you want to use.
Figure 3-6.2.
Display menu.
Contrast
Back Light
Font
3-6 | 3050-AMS Moisture Analyzer
Config
Display
Enter a value from '1' to '9' . The default is '5' .
Select On or Off. The default is On.
This is a factory-set parameter that identifies the type used for the display
on the analyzer.
CONFIG
Display
Communication
Sample Gas
Clock
Zero Schedule
Production
Codes
Moisture Unit
System Test
Enter Value
Contrast
1 to 9
On
Back Light
Off
Enter Value
Font
0 or 1
PN 305804902, Rev A
Advertisement
Table of Contents
