Table of Contents
Advertisement
Controller/Communications
All analyzer functions are controlled by microprocessors housed within the
analyzer. These include:
The 3050-AMS Analyzer is configured, and analyzer parameters are set, by us-
ing either the analyzer display, keypad and function keys, or using an external
PC.
1-2 | 3050-AMS Moisture Analyzer
One (1) fully configurable analog output (4–20 mA) that can be self-pow-
ered or externally powered.
Three (3) alarm contacts (data valid, concentration alarm, and system
alarm).
One (1) RS-232 or one (1) RS-485 serial interface provides communication
between the analyzer and your recording or data acquisition equipment.
4-line x 20-character LCD display that provides moisture data, system oper-
ating parameters, system messages, and alarm conditions.
An 18-button keypad on the front of the unit that is used to set or change
operating parameters and system values.
Serial interface to an external PC.
PN 305804902, Rev A
Advertisement
Table of Contents
