Kubota 07-CR-E5 Manual page 89

07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
6. Malfunction Verification - 2
1. Check for a large driving resistance due to problems in the
machine itself that do not involve the engine.
• Large resistance for actuation
• Tire air pressure
• Power transmission fault
• Brake drag
OK Go to "7. Check the Intake System".
NG Repair or adjust the malfunction.
7. Check the Intake System
1. Check in accordance with "6.[1] AIR INTAKE SYSTEM
INSPECTION PROCEDURE". (Refer to page 1-S320)
OK Go to "8. Check the Fuel System".
NG Repair in accordance with "6.[1] AIR INTAKE SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S320)
8. Check the Fuel System
1. Check in accordance with "6.[2] FUEL SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S321)
OK Go to "9. Check the Crankshaft Position Sensor".
NG Repair in accordance with "6.[2] FUEL SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S321)
(1) Rail
9. Check the Crankshaft Position Sensor
1. Refer to DTC P0335 and P0336, and implement checking of the
crankshaft position sensor.
OK Go to "10. Check the Camshaft Position Sensor".
NG Replace the crankshaft position sensor-related parts.
(1) Crankshaft Position Sensor
(NE Sensor)
10. Check the Camshaft Position Sensor
1. Refer to DTC P0340 and P0341, and implement checking of the
camshaft position sensor.
OK Go to "11. Check the Rail Pressure Sensor and Supply Pump".
NG Replace the camshaft position sensor-related parts.
(1) Camshaft Position Sensor
(G Sensor)
1-S51
COMMON RAIL SYSTEM
9Y3200007CRS0075US0
9Y3200007CRS0076US0
(2) Supply Pump
9Y3200007CRS0077US0
9Y3200007CRS0078US0
9Y3200007CRS0079US0
KiSC issued 03, 2022 A