Table of Contents
Advertisement
07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
2. Checking Wiring Harness
1. Disconnect the sensors and the ECU from the connector.
2. Check the continuity of the harness.
NOTE
• When checking the continuity of terminals, refer to the
sensor terminal and ECU terminal layouts on the detailed
pages of the corresponding DTCs.
Service
Conducting
specification
OK
Replace the intake throttle assembly.
NG
Replace the wiring harness (connectors).
1-S288
COMMON RAIL SYSTEM
NEW9Y3200007CRS0376-1US0
KiSC issued 03, 2022 A
Advertisement
Chapters
Table of Contents
