Kubota 07-CR-E5 Manual page 169

07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
Name
ISO 14229
P-Code
SPN
J1939-73
FMI
SPN Name proprietary
SAE J1939 Table
C1
DTC Name CAN DDC1 (Transmission) frame error
Detection item • CAN_DDC1 communication stopping
• Battery voltage is normal
DTC Set
• Starter Switch signal (Engine ECU: V12
Preconditions
DTC set parameter • CAN DDC1 frame time out error
Time to action or • 0.5 sec. or more
number of error
detection
Limp Home Action • Accelerator non-linear processing flag =
by engine ECU
(system action) • Accelerator non-linear processing invalid
Behaviour During • None
Malfunction
Engine Warning • ON
Light
Recovery from • Key switch turn OFF
error
Delay time for
recovery
Remark
U0084
523593
2
terminal) is not activated
0 [default value]
–
CAN2 frame error
proprietary
CAN ETC5 (Neutral SW) frame error
• CAN_ETC5 communication stopping
• Battery voltage is normal
• Starter Switch signal (Engine ECU: V12
terminal) is not activated
• CAN ETC5 frame time out error
• 0.5 sec. or more
• Neutral SW = OFF [default value]
• None
• ON
• Key switch turn OFF
1-S131
COMMON RAIL SYSTEM
U0086
523595
2
–
9Y3200007CRS0166US0
KiSC issued 03, 2022 A