Kubota 07-CR-E5 Manual page 312

07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
2. Check the DTC
1. Place the key switch to the OFF position first, then return it to
the ON position again.
2. Clear the past DTCs, and check whether the same DTC (P2228
or P2229) is output again or not.
Service
OK
specification
OK An electromagnetic interference (EMI) may have caused the temporary
malfunction. There is no problem if the system has recovered.
NG Faulty atmospheric pressure sensor → Replace the engine ECU.
(a) CAN1 Connector
1-S274
COMMON RAIL SYSTEM
9Y3200007CRS0425US0
KiSC issued 03, 2022 A