07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
1. Check the DTC
1. Place the key switch in the OFF position, attach the diagnosis
tool to the CAN1 connector, and return the key switch to the ON
position again.
2. Clear the DTC, and check whether the same DTC (P1C00,
P1C01 or P1C02) is output again or not.
Service
No DTC is output.
specification
OK
An electromagnetic interference (EMI) may have caused the temporary
malfunction. There is no problem if the system has recovered.
NG
Faulty engine ECU → Replace.
(a) CAN1 Connector
1-S243
COMMON RAIL SYSTEM
9Y3200007CRS0549US0
KiSC issued 03, 2022 A