Kubota 07-CR-E5 Manual page 218

07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
3. Replacing the Engine ECU and Checking Whether the DTC Is
Detected Again
1. Replace the engine ECU.
2. Turn the key switch OFF and then ON again.
3. After clearing the DTC, turn the key switch OFF and then ON
again, and start the engine.
4. Check whether or not the same DTC (P0200) is detected.
Service
DTC is not detected.
specification
OK Engine ECU fault → Replace the engine ECU.
(a) CAN1 Connector
1-S180
COMMON RAIL SYSTEM
9Y3200007CRS0243US0
KiSC issued 03, 2022 A