Kubota 07-CR-E5 Manual page 84

07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
5. Check the Fuel System
1. Check in accordance with "6.[2] FUEL SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S321)
(Reference)
Pay attention particularly to the following two points:
• Service fuel (for summer / winter seasons, and cold region)
• Fuel leak from the fuel line
OK Go to "6. Check the Intake System".
NG Repair or replace the malfunctioning component.
(1) Rail
6. Check the Intake System
1. Check in accordance with "6.[1] AIR INTAKE SYSTEM
INSPECTION PROCEDURE". (Refer to page 1-S320)
(Reference)
Pay attention particularly to the following point:
• Intake air leak
OK Go to "7. Check the Coolant Temperature Increase Rate".
NG Repair or replace the malfunctioning component.
7. Check the Coolant Temperature Increase Rate
1. Check the speed of the coolant temperature increase on the
coolant temperature gauge in the instrument panel (compared
with a normal device).
OK Go to "8. Check the Crankshaft Position Sensor".
NG Check and repair the cooling system.
8. Check the Crankshaft Position Sensor
1. Refer to DTC P0335 and P0336, and implement checking of the
crankshaft position sensor.
OK Go to "9. Check the Camshaft Position Sensor".
NG Replace the crankshaft position sensor-related parts.
(1) Crankshaft Position Sensor
(NE Sensor)
9. Check the Camshaft Position Sensor
1. Refer to DTC P0340 and P0341, and implement checking of the
camshaft position sensor.
OK Go to "10. Check the Rail Pressure Sensor And Supply Pump".
NG Replace the camshaft position sensor-related parts.
(1) Camshaft Position Sensor
(G Sensor)
1-S46
COMMON RAIL SYSTEM
(2) Supply Pump
9Y3200007CRS0062US0
9Y3200007CRS0063US0
9Y3200007CRS0064US0
9Y3200007CRS0065US0
9Y3200007CRS0066US0
KiSC issued 03, 2022 A