Kubota 07-CR-E5 Manual page 315

07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
1. DTC Judgment
1. Place the key switch in the OFF position, and attach the
diagnosis tool to the CAN1 connector.
2. Place the key switch in the ON position, check whether the DTC
is output or not.
3. Check the DTC again after starting up the engine with the
coolant temperature over 50 °C (122 °F).
Service
DTC must not be output.
specification
OK Normal.
NG Replace the EGR assembly.
(a) CAN1 Connector
1-S277
COMMON RAIL SYSTEM
9Y3200007CRS0298US0
KiSC issued 03, 2022 A