Kubota 07-CR-E5 Manual page 71

Common rail system
Table of Contents

Advertisement

07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
5. Check the Fuel System
1. Check in accordance with "6.[2] FUEL SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S321)
OK
Go to "6. Check the Engine ECU Power Supply and Grounding".
NG
Repair in accordance with "6.[2] FUEL SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S321)
(1) Rail
6. Check the Engine ECU Power Supply and Grounding
1. Turn the key switch ON and measure the voltage between the
engine ECU +BP terminals (V18 / V38 / V58 / V78) and ground
(body / battery terminal) and engine ECU S-GND terminal (V40
/ V60) and ground (body / battery terminal).
Service
+BP terminal - ground: 10 V or higher
specification
S-GND terminal - ground: 0.5 V or lower
OK
Go to "7. Check the Crankshaft Position Sensor and Camshaft Position
Sensor Signal".
NG
Diagnose by referring to "6.[3]. ELECTRIC SYSTEM INSPECTION
PROCEDURE - (3) Checking The Power And Ground System (Main
Relay, Engine ECU Circuit)". (Refer to page 1-S330)
7. Check the Crankshaft Position Sensor and Camshaft
Position Sensor Signals
1. Set the key switch to START position and crank the engine.
Check the "Engine speed active flag" and "Cam speed active
flag" using the diagnosis tool data monitor function.
Service
Both sides ON and constant
specification
OK
Normal.
NG
Go to "8. Supply Pump Learning and Checking the Monitor".
Both flags
Cause of the engine starting failure has been determined.
are
Determine the malfunction area by referring to sections in
unsatisfact
P0335, P0336 (Refer to page 1-S191) and P0340, P0341
ory.
(Refer to page 1-S196) in "5.[2] DIAGNOSIS BY DTC".
Only one
Care should be taken as this does not cause engine starting
side of the
failure. Since the sensor signal is abnormal, determine the
flag is
malfunction area by referring to sections in P0335, P0336
unsatisfact
(Refer to page 1-S191) and P0340, P0341 (Refer to page
ory.
1-S196) in "5.[2] DIAGNOSIS BY DTC" as was the case in the
above.
(a) CAN1 Connector
1-S33
COMMON RAIL SYSTEM
(2) Supply Pump
9Y3200007CRS0031US0
9Y3200007CRS0032US0
9Y3200007CRS0033US0
KiSC issued 03, 2022 A

Advertisement

Table of Contents
loading

Table of Contents