Kubota 07-CR-E5 Manual page 162

07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
Name
ISO 14229
P-Code
SPN
J1939-73
FMI
SPN Name proprietary
SAE J1939 Table C1
Low coolant temperature in parked
DTC Name
regeneration
Detection item
DTC Set
Preconditions
DTC set parameter
Time to action or
number of error
detection
Limp Home Action
by engine ECU
(system action)
Behaviour During
Malfunction
Engine Warning
Light
Recovery from
error
Delay time for
recovery
Remark
Low coolant temperature in parked
regeneration
P3012
523589
17
• During regeneration mode, engine
warm-up condition is not satisfied
(coolant temperature is low)
• During parked active regeneration mode
• Engine coolant temperature stays below
50 °C (122 °F) for 1500 seconds or more
under parked regeneration process
• Transient
• None
• None
• ON
• Diagnostic counter = zero
or Key switch turn OFF
(Leaving from parked active
regeneration status)
• Immediately
Parked regeneration time out
proprietary
Parked regeneration time out
• Time out error: regeneration incomplete
due to low temperature of DPF
• During parked active regeneration mode
• Coolant temperature is 50 °C (122 °F) or
more
• Regeneration process is not completed
within 2700 sec.
• Transient
• None
• None
• ON
• Diagnostic counter = zero
or Key switch turn OFF
(Leaving from parked active
regeneration status)
• Immediately
1-S124
COMMON RAIL SYSTEM
P3013
523590
16
9Y3200007CRS0160US0
KiSC issued 03, 2022 A