Kubota 07-CR-E5 Manual page 129

07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
Name
ISO 14229
P-Code
SPN
J1939-73
FMI
SPN Name Aftertreatment 1 Diesel Particulate Filter
SAE J1939 Table C1 Intake Gas Temperature
DTC Name Exhaust gas temperature sensor 1: Low
Detection item
DTC Set
Preconditions
DTC set parameter
Time to action or
number of error
detection
Limp Home Action
by engine ECU
(system action)
Behaviour During
Malfunction
Engine Warning
Light
Recovery from
error
Delay time for
recovery
Remark
Exhaust gas temperature sensor (T
P0543
3242
4
• Ground short circuit of sensor / harness
• Battery voltage is normal
• Exhaust gas temperature sensor (T
voltage: 0.08 V or less
• 5 sec. or more
• 0 °C (32 °F) [default value]
• Output limitation: Approximately 75 % of
normal condition
• None
• ON
• Key switch turn OFF
–
Aftertreatment 1 Diesel Particulate Filter
Intake Gas Temperature
Exhaust gas temperature sensor 1: High
• Open circuit or +B short circuit of sensor
/ harness.
• Battery voltage is normal
• Coolant temperature is 50 °C (122 °F) or
more: continues longer than 10 min. after
engine starting
• 100 °C (212 °F) ≤ T
continues longer than 10 sec. or 100 °C
(212 °F) ≤ T
continues longer than 10sec.
) • Exhaust gas temperature sensor (T
1
voltage: 4.92 V or more
• 120 sec. or more
• 0 °C (32 °F) [default value]
• Output limitation: Approximately 75 % of
normal condition
• None
• ON
• Key switch turn OFF
1-S91
COMMON RAIL SYSTEM
) abnormality
1
P0544
3242
3
≤ 800 °C (1472 °F):
0
≤ 800 °C (1472 °F):
2
–
9Y3200007CRS0129US0
KiSC issued 03, 2022 A
)
1