Port Hybrid Vlan - H3C S6550X-HI Series Command Reference Manual

Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
: Specifies a VLAN by its ID in the range of 1 to 4094.
vlan-id
Usage guidelines
You can use a nonexistent VLAN as the PVID of a hybrid port. When you delete the PVID of a hybrid
port by using the
For correct packet transmission, set the same PVID for a local hybrid port and its peer.
To enable a hybrid port to transmit packets from its PVID, you must assign the hybrid port to the PVID
by using the
Examples
# Configure Twenty-FiveGigE 1/0/1 as a hybrid port, set its PVID to VLAN 100, and assign it to VLAN
100 as an untagged member.
<Sysname> system-view
[Sysname] vlan 100
[Sysname-vlan100] quit
[Sysname] interface twenty-fivegige 1/0/1
[Sysname-Twenty-FiveGigE1/0/1] port link-type hybrid
[Sysname-Twenty-FiveGigE1/0/1] port hybrid pvid vlan 100
[Sysname-Twenty-FiveGigE1/0/1] port hybrid vlan 100 untagged
Related commands

port hybrid vlan

port link-type
port hybrid vlan
Use
port hybrid vlan
Use
undo port hybrid vlan
Syntax
port hybrid vlan vlan-id-list { tagged | untagged }
undo port hybrid vlan vlan-id-list
Default
A hybrid port is an untagged member of the VLAN to which the port belongs when its link type is
.
access
Views
Layer 2 aggregate interface view
Layer 2 Ethernet interface view
Predefined user roles
network-admin
command, the PVID setting of the port does not change.
undo vlan
port hybrid vlan
to assign a hybrid port to the specified VLANs.
command.
to remove a hybrid port from the specified VLANs.
15