Line Class - H3C S6550X-HI Series Command Reference Manual

Predefined user roles
network-admin
Parameters
first-number1
last-number1
This number must be greater than
: Specifies the AUX line.
aux
: Specifies the VTY line.
vty
first-number2
lines and 0 to 63 for VTY lines.
last-number2
for AUX lines. The value range is 1 to 63 for VTY lines. This number must be greater than
first-number2
Examples
# Enter the view of VTY line 0.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0]
# Enter the views of VTY lines 0 to 63.
<Sysname> system-view
[Sysname] line vty 0 63
[Sysname-line-vty0-63]
Related commands

line class

line class
Use
line class
Syntax
line class {
Views
System view
Predefined user roles
network-admin
Parameters
: Specifies the AUX line class view.
aux
: Specifies the VTY line class view.
vty
Usage guidelines
To configure the same settings for all user lines of a line class, use this command to enter the user
line class view.
In user line class view, you can execute the following commands:
•
activation-key
: Specifies the absolute number of the first user line. The value range is 0 to 64.
: Specifies the absolute number of the last user line. The value range is 1 to 64.
first-number1
: Specifies the relative number of the first user line. The value is fixed at 0 for AUX
: Specifies the relative number of the last user line. This argument is not available
.
to enter user line class view.
console | vty }
.
27