Configuration Commit; Configuration Commit Delay - H3C S6550X-HI Series Command Reference Manual

Backing up the main startup configuration file to 2.2.2.2 in VPN VPN1...
Done.
# Back up the main next-startup configuration file to the IPv6 TFTP server at 2001::2 in the public
network, and set the target file name to 192-168-1-26.cfg.
<Sysname> backup startup-configuration to ipv6 2001::2 192-168-1-26.cfg
Backing up the main startup configuration file to 2001::2...
Done.
Related commands
restore startup-configuration

configuration commit

Use
configuration commit
delay timer was set.
Syntax
configuration commit
Views
System view
Predefined user roles
network-admin
Usage guidelines
You must execute the
timer before executing this command.
The settings you made during the commit delay interval are automatically removed if you have not
manually committed them before the configuration commit delay timer expires.
As a best practice, configure the information center to output logs to the console. Use the logs to
determine whether you want to commit the settings. For more information about the information
center, see System Management Configuration Guide.
Examples
# Set the configuration commit delay timer to 10 minutes.
<Sysname> system-view
[Sysname] configuration commit delay 10
# Commit the settings configured after the configuration commit delay timer was set and before the
delay timer expires.
[Sysname] configuration commit
Related commands

configuration commit delay

configuration commit delay
Use
configuration commit delay
the configuration commit delay timer.
Syntax
configuration commit delay delay-time
to commit the settings configured after the configuration commit
configuration commit delay
to enable the configuration commit delay feature and start
9
command to set the configuration delay