Display Install Rollback - H3C S6550X-HI Series Command Reference Manual

<Sysname> display install package flash:/system.bin verbose
flash:/system.bin
[Package]
Vendor: H3C
Product: S6550X
Service name: system
Platform version: 7.1.070
Product version: Test 0001015
Supported board: mpu
[Component]
Component: system
Description: system package
For information about the command output, see

display install rollback

Use
display install rollback
Syntax
display install rollback [ point-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
point-id
displays all rollback points.
Usage guidelines
Use this command to identify available rollback points during an ISSU that uses
commands.
Examples
# Display all rollback points.
<Sysname> display install rollback
Install rollback information 1 on slot 1:
Updating from flash:/route-1.bin
to flash:/route-2.bin.
Install rollback information 2 on slot 1:
Deactivating flash:/route-2.bin
The output shows that the device has two rollback points.
•
At rollback point 1, flash:/route-1.bin was upgraded to flash:/route-2.bin.
•
At rollback point 2, flash:/route-2.bin was deactivated.
Related commands
install rollback
: Specifies a rollback point ID. If you do not specify a rollback point ID, the command
Table 2.
to display rollback point information.
12
install