Vlan Commands; Basic Vlan Commands; Default; Description - H3C S6550X-HI Series Command Reference Manual

VLAN commands

Basic VLAN commands

default

Use
default
Syntax
default
Views
VLAN interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The
default
the impact of this command when you use it on a live network.
This command might fail to restore the default settings for some commands for reasons such as
command dependencies or system restrictions. Use the
to identify these commands, and then use their
restore their default settings. If your restoration attempt still fails, follow the error message
instructions to resolve the problem.
Examples
# Restore the default settings for VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] default

description

Use
description
Use
undo description
Syntax
description text
undo description
Default
The description is
format. If the VLAN ID has fewer than four digits, leading zeros are added. For example, the default
description of VLAN 100 is VLAN 0100.
to restore the default settings for a VLAN interface.
command might interrupt ongoing network services. Make sure you are fully aware of
to configure the description of a VLAN.
to restore the default.
. The
VLAN vlan-id
display this
forms or follow the command reference to
undo
argument specifies the VLAN ID in a four-digit
vlan-id
1
command in interface view