Lldp Neighbor-Identity Port-Id - H3C S6550X-HI Series Command Reference Manual

Chassis ID subtype
4
5
6
7
chassis-id
Usage guidelines
The chassis ID TLV criterion configured on an interface takes effect only after the
neighbor-protection validation
If you execute this command multiple times for an interface, the most recent configuration takes
effect.
Examples
# Configure the chassis ID TLV criterion on Twenty-FiveGigE1/0/1 for neighbor validation.
<Sysname> system-view
[Sysname] interface twenty-fivegige 1/0/1
[Sysname-Twenty-FiveGigE1/0/1] lldp neighbor-identity chassis-id 4 0012-2255-7766
Related commands
lldp neighbor-protection validation

lldp neighbor-identity port-id

Use
lldp neighbor-identity port-id
validation.
Use
undo lldp neighbor-identity port-id
Syntax
lldp neighbor-identity port-id port-id-subtype port-id
undo lldp neighbor-identity port-id
Default
No port ID TLV criterion is configured on an interface for neighbor validation.
Views
Layer 2 Ethernet interface view
Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
port-id-subtype
The port ID subtype indicates the type of identifier used for the port.
subtypes and the ID bases.
: Specifies the chassis ID, a case-sensitive string of 1 to 255 characters.
: Specifies the port ID subtype. The value is an integer in the range of 1 to 7.
ID basis
MAC address
Network address
Interface name
Locally assigned
command is configured on the interface.
to configure the port ID TLV criterion for neighbor
to restore the default.
31
Table 7 lists the available port ID
lldp