Loopback, Null, And Inloopback Interface Commands; Display Interface Inloopback - H3C S6550X-HI Series Command Reference Manual

Loopback, null, and inloopback interface
commands

display interface inloopback

Use
display interface inloopback
Syntax
display interface [ inloopback [ 0 ] ] [ brief [ description | down ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
inloopback [ 0 ]
command displays information about all interfaces.
: Displays brief interface information. If you do not specify this keyword, the command
brief
displays detailed interface information.
description
command displays only the first 25 characters of interface descriptions. The description of an
inloopback interface is always InLoopBack0 Interface and cannot be configured.
: Displays information about interfaces in down state and the causes. If you do not specify this
down
keyword, the command displays information about interfaces in all states.
Usage guidelines
The device has only one inloopback interface Inloopback 0. If you specify the
keyword, the command displays information about the interface Inloopback 0 regardless of whether
you specify the
Examples
# Display detailed information about Inloopback 0.
<Sysname> display interface inloopback
InLoopBack0
Current state: UP
Line protocol state: UP(spoofing)
Description: InLoopBack0 Interface
Maximum transmission unit: 1536
Physical: InLoopBack
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Input: 0 packets, 0 bytes, 0 drops
Output: 0 packets, 0 bytes, 0 drops
: Specifies Inloopback 0. If you do not specify the
: Displays complete interface descriptions. If you do not specify this keyword, the
keyword.
0
to display information about the inloopback interface.
1
keyword, the
inloopback
inloopback