Tftp Ipv6 - H3C S6550X-HI Series Command Reference Manual

tftp ipv6

Use
tftp ipv6
network.
Syntax
tftp ipv6 tftp-server [ -i interface-type interface-number ] { get | put |
sget }
vpn-instance-name ] [ dscp dscp-value | source { interface interface-type
interface-number | ipv6 source-ipv6-address } ] * [ -d ]
Views
User view
Predefined user roles
network-admin
Parameters
tftp-server
case-insensitive string of 1 to 253 characters and can contain only letters, digits, hyphens (-),
underscores (_), and dots (.).
-i interface-type interface-number
This option can be used only when the TFTP server address is a link local address and the specified
output interface has a link local address. For information about link local addresses, see Layer 3—IP
Services Configuration Guide.
: Downloads a file and writes the file directly to the destination folder. If the destination folder
get
already has a file with the same name, the system deletes the existing file before starting the
download operation. The existing file is permanently deleted even if the download operation fails.
: Uploads a file.
put
: Downloads a file and saves the file to memory before writing it to the destination folder. The
sget
system starts to write the file to the destination folder only after the file is downloaded and saved to
memory successfully. If the destination folder already has a file using the same name, the system
overwrites the existing file. If the download or save-to-memory operation fails, the existing file in the
destination folder is not overwritten.
source-filename
characters.
destination-filename
255 characters. If this argument is not specified, the file uses the source file name.
vpn-instance vpn-instance-name
server belongs. The
characters. If the TFTP server belongs to the public network, do not specify this option.
dscp dscp-value
the packet transmission priority. The value range is 0 to 63. The default is 0.
source
source-ipv6-address }
specify this option, the device selects a source IPv6 address as defined in RFC 3484.
•
interface interface-type interface-number
and number. The device will use the interface's IPv6 address as the source IPv6 address. For
successful TFTP packet transmission, make sure the interface is up and is configured with an
IPv6 address.
to download a file from a TFTP server or upload a file to a TFTP server in an IPv6
source-filename
: Specifies the IPv6 address or host name of a TFTP server. The host name can be a
: Specifies the source file name, a case-insensitive string of 1 to 255
: Specifies the destination file name, a case-insensitive string of 1 to
vpn-instance-name
: Specifies the DSCP value for IPv6 to use in outgoing TFTP packets to indicate
{ interface
: Specifies the source address for outgoing TFTP packets. If you do not
[ destination-filename
: Specifies an output interface by its type and number.
: Specifies the MPLS L3VPN instance to which the TFTP
argument is a case-sensitive string of 1 to 31
interface-type
43
] [ vpn-instance
interface-number
: Specifies an interface by its type
| ipv6