Display Arp - H3C S6550X-HI Series Command Reference Manual

Default
Recording user port migrations is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The device can generate a maximum of 10 user port migration logs per second.
To display user port migration records, use the
Examples
# Enable recording user port migration.
<Sysname> system-view
[Sysname] arp user-move record enable
Related commands
display arp user-move record

display arp

Use
display arp
Syntax
display arp [ [ all | dynamic | static ] [ slot slot-number ] | vlan vlan-id |
interface interface-type interface-number ] [ count | verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
: Displays all ARP entries.
all
: Displays dynamic ARP entries.
dynamic
: Displays static ARP entries.
static
slot slot-number
vlan vlan-id
interface interface-type interface-number
number. If you do not specify an interface, this command displays ARP entries for all interfaces.
: Displays the number of ARP entries.
count
: Displays detailed information about ARP entries.
verbose
Usage guidelines
This command displays information about static and dynamic ARP entries, including the IP address,
MAC address, VLAN ID, output interface, entry type, and aging timer.
to display ARP entries.
: Specifies the slot number of the device, which is fixed at 1.
: Specifies a VLAN by its VLAN ID. The VLAN ID is in the range of 1 to 4094.
display arp user-move record
: Specifies an interface by its type and
11
command.