Revision-Level; Snmp-Agent Trap Enable Stp - H3C S6550X-HI Series Command Reference Manual

Related commands
display stp

revision-level

Use
revision-level
Use
undo revision-level
Syntax
revision-level level
undo revision-level
Default
The MSTP revision level is 0.
Views
MST region view
Predefined user roles
network-admin
Parameters
: Specifies an MSTP revision level in the range of 0 to 65535.
level
Usage guidelines
The MSTP revision level, the MST region name, and the VLAN-to-instance mapping table of a
device determine the device's MST region.
After configuring this command, execute the
activate the configured MST region level.
Examples
# Set the MSTP revision level of the MST region to 5.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] revision-level 5
Related commands
active region-configuration
check region-configuration
display stp region-configuration
instance
region-name
vlan-mapping modulo

snmp-agent trap enable stp

Use
snmp-agent trap enable stp
or spanning tree topology changes.
Use
undo snmp-agent trap enable stp
events or spanning tree topology changes.
to configure the MSTP revision level.
to restore the default MSTP revision level.
to enable SNMP notifications for new-root election events
22
active region-configuration
to disable SNMP notifications for new-root election
command to