Tftp Client Ipv6 Source - H3C S6550X-HI Series Command Reference Manual

Table of Contents

Advertisement

Field
got option=(parameter)
value=(value)
TFTP_STATE_RX
TFTP_STATE_TX
Received unexpected DATA packet
block %d, expecting block %d
multi_done
Expire cleared
Related commands
tftp client source

tftp client ipv6 source

Use
tftp client ipv6 source
IPv6 TFTP server.
Use
undo tftp client ipv6 source
Syntax
tftp client ipv6 source { interface interface-type interface-number | ipv6
source-ipv6-address }
undo tftp client ipv6 source
Default
No source address is specified for TFTP packets sent to an IPv6 TFTP server. The device selects a
source IPv6 address as defined in RFC 3484.
Views
System view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number
number. The device will use the interface's IPv6 address as the source address. For successful
TFTP packet transmission, make sure the interface is up and is configured with an IPv6 address.
ipv6 source-ipv6-address
transmission, make sure this address is the IPv6 address of an interface in up state on the device.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
The source address specified with the
address specified with the
The source address specified with the
connections. The source address specified with the
connection that is being established.
Description
The received packet contained the parameter option. The value of
the parameter option was value.
The TFTP service was receiving data.
The TFTP service was sending data.
The TFTP service received an unexpected data packet block (%d
bytes long). The expected data packet block was %d bytes long.
All operations were completed.
The TFTP service ended.
to specify the source IPv6 address for TFTP packets sent to an
to restore the default.
: Specifies an IPv6 address . For successful TFTP packet
tftp ipv6
tftp client ipv6 source
tftp client ipv6 source
41
: Specifies an interface by its type and
command takes precedence over the source
command.
command applies to all TFTP
command applies only to the TFTP
tftp ipv6

Advertisement

Table of Contents
loading

Table of Contents