Install Add - H3C S6550X-HI Series Command Reference Manual

Table 6 Command output
Field
Verifying the file
Upgrade summary according
to following table
Running Version
New Version
Upgrade Way
Influenced service according
to following table
Related commands
display install active
install commit
install deactivate

install add

Use
install add
Syntax
install add ipe-filename filesystem
Views
User view
Predefined user roles
network-admin
Parameters
ipe-filename
stored in the root directory of a file system on the device. The value string excluding the file system
location section (if any) can have a maximum of 63 characters. For more information about
specifying a file, see file system management in Fundamentals Configuration Guide.
filesystem
format.
Usage guidelines
To use the
install activate
files. If the upgrade file is an .ipe file, use this command to decompress the .ipe file before you start
the upgrade.
Description
The system was verifying the validity of the file.
Upgrade summary.
Version number of the running software.
Version number of the new software.
ISSU methods:
•
Service Upgrade.
•
File Upgrade.
•
Reboot.
This field is displayed only for an upgrade to a compatible version.
For more information about ISSU methods, see Fundamentals
Configuration Guide.
Services influenced by the upgrade.
to decompress an .ipe file.
: Specifies an .ipe file in the filesystemname/filename.ipe format. The file must be
: Specifies the destination file system for the software images, in the filesystemname
command to activate software images, you must use .bin image
18