Stp Bridge-Diameter - H3C S6550X-HI Series Command Reference Manual

Table of Contents

Advertisement

Usage guidelines
With BPDU guard enabled, the device shuts down an edge port and notifies the NMS of the
shutdown event when the edge port receives configuration BPDUs.
The device reactivates the ports that have been shut down when the port status detection timer
expires. You can set this timer by using the
about this command, see device management commands in System Management Command
Reference.
The
stp bpdu-protection
stp edged-port
You can configure the BPDU guard feature in system view or on a per-edge port basis. An edge port
preferentially uses the port-specific BPDU guard setting. If the port-specific BPDU guard setting is
not available, the edge port uses the global BPDU guard setting.
Examples
# Enable BPDU guard globally.
<Sysname> system-view
[Sysname] stp bpdu-protection
Related commands
shutdown-interval
stp edged-port
stp port bpdu-protection

stp bridge-diameter

Use
stp bridge-diameter
the maximum number of devices on the path for an edge device to reach another through the root
bridge.
Use
undo stp bridge-diameter
Syntax
stp [ vlan vlan-id-list ] bridge-diameter diameter
undo stp [ vlan vlan-id-list ] bridge-diameter
Default
The network diameter of the switched network is 7.
Views
System view
Predefined user roles
network-admin
Parameters
vlan vlan-id-list
specifies a VLAN or a range of VLANs in the form of
vlan-id2
argument is 1 to 4094. If you set the STP, RSTP, or MSTP switched network diameter, do
vlan-id
not specify this option.
diameter
command takes effect only on the edge ports configured by using the
command.
(Fundamentals Command Reference)
to set the network diameter. The switched network diameter refers to
: Specifies a space-separated list of up to 10 VLAN items. Each item
must be equal to or greater than the value for
: Specifies the switched network diameter in the range of 2 to 7.
shutdown-interval
to restore the default.
vlan-id1 [ to vlan-id2 ]
24
command. For more information
. The value range for the
vlan-id1
. The value for

Advertisement

Table of Contents
loading

Table of Contents