Startup Saved-Configuration - H3C S6550X-HI Series Command Reference Manual

(To leave the existing filename unchanged, press the enter key):test.cfg
Validating file. Please wait............
Saving docker files need some time. Do you want to save docker files in this process? [Y/N]:y
Saving docker files............
Done.
Saved the current configuration to mainboard device successfully.
Related commands
display current-configuration
display saved-configuration

startup saved-configuration

Use
startup saved-configuration
Use
undo startup saved-configuration
defaults at the next startup.
Syntax
startup saved-configuration cfgfile [ backup | main ]
undo startup saved-configuration
Default
No next-startup configuration files are specified.
Views
User view
Predefined user roles
network-admin
Parameters
: Specifies the path of a configuration file, a string of up to 255 characters. The file must be
cfgfile
a .cfg file. The file path can include only the file name, or the storage medium information and file
name. If the file is not on the default storage medium, you must specify the file name with storage
medium information.
backup : Specifies the configuration file as the backup next-startup configuration file.
: Specifies the configuration file as the main next-startup configuration file. This is the primary
main
configuration file that the device attempts to load at startup. If the loading attempt fails, the device
tries the backup next-startup configuration file.
Usage guidelines
The
startup saved-configuration
execute this command, make sure the specified file has been saved in the root directory of the
storage medium on each member.
If you do not specify the
command specifies the main next-startup configuration file.
As a best practice, specify different files as the main and backup next-startup configuration files.
The
undo startup saved-configuration
and backup next-startup configuration files to NULL. However, the command does not delete the two
configuration files.
to specify a file as a next-startup configuration file.
command applies to all IRF members. To successfully
backup or main keyword, the
25
to configure the system to start up with the factory
startup saved-configuration
command changes the file attribute of the main