Voice-Config - H3C S6550X-HI Series Command Reference Manual

Syntax
verify class
undo verify class
Default
The DHCP user class whitelist is disabled.
Views
DHCP address pool view
Predefined user roles
network-admin
Usage guidelines
After you enable the DHCP user class whitelist, the DHCP server processes requests only from
clients on the DHCP user class whitelist.
The DHCP user class whitelist does not take effect on clients that request static IP addresses, and
the server always processes their requests.
Examples
# Enable the DHCP user class whitelist in DHCP address pool 0.
[Sysname] system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] verify class
Related commands
valid class

voice-config

Use
voice-config
Use
undo voice-config
Syntax
voice-config { as-ip ip-address | fail-over ip-address dialer-string |
ncp-ip ip-address | voice-vlan vlan-id { disable | enable } }
undo voice-config [ as-ip | fail-over | ncp-ip | voice-vlan ]
Default
No Option 184 content is configured in a DHCP address pool.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
as-ip ip-address
fail-over ip-address dialer-string
The
dialer-string
ncp-ip ip-address
to configure the content for Option 184 in a DHCP address pool.
to remove the Option 184 content from a DHCP address pool.
: Specifies the IP address of the backup network calling processor.
is a string of 1 to 39 characters. Valid characters are digits and asterisk (
: Specifies the IP address of the primary network calling processor.
58
: Specifies the failover IP address and dialer string.
).
*