Install Deactivate; Install Remove - H3C S6550X-HI Series Command Reference Manual

Related commands
install activate

install deactivate

install rollback
install deactivate
Use
install deactivate
Syntax
install deactivate feature filename&<1-30> slot slot-number
install deactivate patch filename { all | slot slot-number }
Views
User view
Predefined user roles
network-admin
Parameters
feature : Specifies a space-separated list of up to 30 feature image files.
: Specifies a patch image file. You can specify only one patch image file for the command at
patch
a time. However, you can execute the command multiple times to deactivate multiple patch image
files.
: Specifies a .bin file in the filesystemname/filename.bin format. The file must be stored
filename
in the root directory of a file system on the device. Excluding the file system location section (if any),
the value string can have a maximum of 63 characters. For more information about specifying a file,
see file system management in Fundamentals Configuration Guide.
: This keyword is insignificant.
all
slot slot-number
Usage guidelines
You can deactivate only active feature and patch images. To prevent deactivated images from
running after a reboot, you must commit the software changes by using the
command.
Examples
# Deactivate route-patch.bin on the device.
<Sysname> install deactivate patch flash:/route-patch.bin slot 1
This operation might take several minutes, please wait...Done.
Related commands
display install active
display install inactive

install remove

Use
install remove
to deactivate feature or patch images.
: Specifies the slot number of the device, which is fixed at 1.
to delete an inactive software image file.
20
install commit